< Back to Printers Page
 
Model 125X Paper Roll Tape Printer

A little printer for BIG jobs, used for data logging diagnostic results in the automotive, alarm, medical, photo copier, and refrigeration industries.

Dimensions:
4.5" W x 5" D x 2.2" H

Double width, double height, inverted print, reverse print - 24, 32, & 40 characters per line, 1.5K buffer, graphic character sets and 144 dots per line are just some of the capabilities of this printer. Internally configured.

Available Baud rates internally configured from 300 - 19.2.

Print Speed - up to 130 lines per minute, standard - of 110 lines per minute

Modifications available - If special requirements are a needed other than the options below, let us know. Examples are Company Logos, Specialty colors etc..

Options:
Additional 8K Buffer
Paper Out Sensor
Time & Date
RS-232 Cable
DC power modifications
Panel Mount
Small paper roll enclosure
Two part paper

Features and Benefits

  • Compact
    Easily fits into any small application 4.5 W x 5 L x 2.2 H
  • Capable of printing
    Double width, Double Height, inverted print, Reverse print,
    Graphic character sets ,144 dots per line - internally configured
  • Inhibits interline space for graphic character printing-
  • Selectable Character's per line
    24, 43 or 40 - internally configured
  • 1.5K Buffer
  • Prints on standard 2 1/4 inch adding machine paper or 2 part paper
  • Available Baud rates internally configured from 300 - 19.2

Options

Model # Optional Interfaces
Model 1250 RS-232
Model 1251 Parallel
Model 1252 TTL Serial
Model 1253 20mA current loop
Model 1254 RS-485

Modifications - we welcome inquiries to suit your special requirements, such as private labeling, optional colors and interface cables.

Specifications

Available Baud rates
300, 600, 1200, 2400, 4800, 9600, 19.2

Dimensions
4.5 ( L) x 4 (W) x 2.2 (H)

Protocol
Busy signal - Clear to Send (CTS)

Buffer capacity
Full column width character buffering is provided for line character buffer. When data exceeds the line capacity, it automatically wraps around. The printer stores 1500 characters while printing to free up the host or sending device. 8 K buffer option stores 9500 characters

Print method
Impact Dot Matrix
Character Matrix
6 x 8 Dot Matrix

Character Format
ASCII character set - 10 bits per character required, 7 or 8 of which are data bits.

Character spacing
24 column: 12.8 characters per inch
32 column: 17 characters per inch
40 column: 21 characters per inch

Line feed spacing
6.9 lines per inch, character mode

Print speed
130 lines per minute, 24 column 110 lines per minute when configured for 32 and 40 column)

Paper supply
Table-top (standard): 2.25 W x 2.75 D; 0.44 I.D.
Panel Mount (small roll): 2.25 W x 1.25 D

Printhead Life
1,500,000 lines mean character before failure

Ribbon Life
Black: 200,000 characters
Purple: 250,000 characters

Paper
Large roll: 12,500 lines
Small roll: 3,000 lines

Power
1.5 watt (idle), 15 watts (printing)
AC votaltage - 9 VAC (120 VAC step-down converter included)
Multi-national converters optional
DC voltage - Optional on all units 9 -12 VDC
140 mA idle; 1 A average; 5.5A peak for 100% column printing

Voltage levels
RS-232C : -9 volts to + 9 volts
RS-485 : 200 mV differential
Parallel: 0 volts to 5 volts
TTL serial : 0 volts to +5 volts
20 mA current loop

Operating environment
41 F to 104 F (5 C to 40 C)

Top of Page